Kitchen with oak cabinetry, large island seating and pendant lighting

Planning & process

Planning Your Electrics: How to Avoid Costly Changes During Your Extension

Getting your electrical layout right before work begins can make a real difference to your budget and help avoid unnecessary changes.

By Trevor Thorn · Published

When planning a house extension or renovation, it’s easy to focus on the bigger decisions, such as the layout, kitchen design and choice of flooring. But have you thought about where you’ll need your sockets, switches and lights?

Getting your electrical layout right before work begins can make a real difference to your budget and help avoid unnecessary changes later in the project.

In this blog, Trevor Thorn of Thorn Homes explains why planning your electrics early is so important and how a little preparation can help you keep your project on track.

Why is electrical planning so important?

You might be surprised by how basic the electrical provision can be in a new-build home. A typical bedroom, for example, might have just one ceiling light, one switch and two double or single socket outlets, depending on the specification.

When you’re extending or renovating your home, you have an opportunity to design the space around your needs. However, if you haven’t thought about how you’ll use each room, you could end up with too few sockets, poorly positioned switches or lighting that doesn’t suit your lifestyle.

At Thorn Homes, we price electrical work on an item-by-item basis. The number of items allowed for in your quotation will depend on the size and requirements of your project.

As a general guide, a single-storey extension might require around 25–50 electrical items, while a two-storey extension could need 35–100. These figures are indicative, and your actual requirements will depend on your design and specification.

Understanding how many items you need before work starts helps establish a more accurate budget from the outset.

Think about how you’ll use each room

One of the most important things you can do is consider how you intend to furnish and use your new space.

In a bedroom:

  • Where will the bed and bedside tables go?
  • Will you need sockets on both sides of the bed for lamps, phones and other devices?
  • Will there be a dressing table, desk or television?
  • Would you benefit from additional lighting or conveniently positioned switches?

In a kitchen:

  • Where will the oven, hob and fridge be positioned?
  • Where will you use small appliances such as a kettle, toaster and coffee machine?
  • Will you need additional sockets for charging devices?
  • What lighting will you need for food preparation, dining and entertaining?

In a living room:

  • Where will the sofa and television sit?
  • Will you need sockets for lamps, gaming equipment or other devices?
  • Would wall lighting, spotlights or separate lighting zones improve the space?

These decisions might seem straightforward, but they can have a significant impact on the electrical layout.

What happens if you change your mind?

Trevor recently completed a project where the electrical layout had been planned around the intended position of a bed and bedside tables. The sockets, switches and lights were installed accordingly.

However, once the room was finished, including the decorating and carpets, the client decided to move the bed and wanted the electrics repositioned.

Making these changes at that stage meant revisiting work that had already been completed. Moving cables and repositioning sockets or switches can involve additional labour, disruption and cost.

The lesson is simple: think about how you’ll use the room before the electrical work begins, rather than waiting until the project is finished.

Changes during a building project are often possible, but making decisions early is usually easier and more cost-effective than changing things later.

Understand the electrical allowance in your quotation

At Thorn Homes, electrical work is priced according to the number of items included in the quotation. Each socket, switch and light fitting counts towards the agreed allowance, with the associated cabling and installation included according to the agreed specification.

For example, if your quotation allows for 35 electrical items but your planned layout requires 50, it’s worth identifying that difference before work starts.

By reviewing your drawings and deciding where everything needs to go, you can agree on a more appropriate allowance from the outset. This helps you understand the costs involved and reduces the likelihood of unexpected variations during the build.

If your project requires a larger number of items, your contractor may also be able to offer a more favourable rate, depending on the overall scope of work.

A little preparation goes a long way

Planning your electrical layout might feel like another task on an already lengthy list, but it’s time well spent.

Before your project begins, review your architectural drawings and think carefully about your furniture, appliances, lighting and everyday routines. Discuss your requirements with your builder so that the electrical allowance reflects how you intend to use the finished space.

Whether you’re managing the project yourself or working with a contractor, these decisions will need to be made at some point. Making them early gives you greater control over the layout and your budget.

Planning an extension or renovation?

At Thorn Homes, we want our clients to feel informed and prepared before building work begins. Thinking through the details in advance can help reduce uncertainty, avoid unnecessary changes and make the whole process run more smoothly.

Watch Trevor’s video above for more practical advice on planning your electrical layout and understanding how the number of electrical items can affect your building quotation.

If you’re considering an extension or renovation, get in touch with Thorn Homes to discuss your project.